2-Acrylamido-2-methylpropanesulfonic acid is a multifunctional water-soluble anionic surfactant monome. It is a white crystalline powder with a sour odor. 0.1% aqueous solution is hygroscopic and water-soluble, with a solubility of 150 g/100 g in water at 25°C. Soluble in DMF, slightly soluble in methanol, ethanol, insoluble in acetone, toluene and other solvents. It is a strong acid. The pH of the aqueous solution is related to its concentration. The dry monomer is stable at room temperature, but the aqueous solution is very easy to polymerize, and the sodium salt aqueous solution is relatively stable. This product has a polymerizable vinyl group and a hydrophilic sulfonic acid group in the molecule, which can be copolymerized with water-soluble monomers such as acrylonitrile and acrylamide, and non-water-soluble monomers such as styrene and vinyl chloride. The introduction of hydrophilic sulfonic acid groups into polymers makes fibers, films, etc. hygroscopic, water-permeable, and conductive. Can be used in paper industry and wastewater treatment. Used as coating modifier, fiber modifier and medical polymer, etc.
If wet, AMPS monomer will polymerize by itself. Its aqueous solution is acidic, soluble in dimethylamide, partially soluble in methanol and ethanol, and insoluble in acetone. chemical properties
Molecular weight: 207.24700
Accurate mass: 207.05700
PSA: 91.85000
LogP: 1.42670
MDL: MFCD00007522
EINECS: 239-268-0
PubChem: 24857066
BRN: 1946464
InChI=1/C7H13NO4S/c1-4-6(9)8-7(2,3)5-13(10,11)12/h4H,1,5H2,2-3H3,(H,8,9)(H,10,11,12)/p-1
Stable at room temperature. In aqueous solution, the speed of monomer hydrolysis is very slow, but a polymerization inhibitor must be added to prevent its self-polymerization; the aqueous solution of sodium salt has excellent hydrolysis resistance under the condition of pH value greater than 9; homopolymer has good hydrolysis resistance of thermal stability.
AMPS monomer can be homopolymerized or copolymerized. The average heat of polymerization of AMPS in water is 22 kcal/mol. Both water and dimethylformamide can be used as polymerization medium.
AMPS (2-acrylamide-2-methylpropanesulfonic acid) is an organic intermediate with great potential for development. It has a variety of excellent properties and is widely used in the fields of textiles, oil extraction, water treatment, plastics, papermaking and coatings.
About 1/3 of AMPS monomers in the world are used in the water treatment industry. AMPS is copolymerized with acrylonitrile, which can significantly improve the dyeing function of acrylic and acrylic synthetic fibers. It is also a modifier, adhesive and finishing with excellent performance in the coating industry. Performance enhancers such as agents. It is widely used in oil fields, textiles, papermaking, water treatment, synthetic fibers, printing and dyeing, plastics, water-absorbent coatings, biomedicine, etc.
1kg packed in aluminum foil bag, 50kgs per cardboard drum, for details please confirem with sales.
2-8 degrees Celsius, dry and sealed away from light.
For transportation in ice packs, it is required to be sealed and stored at a low temperature below 2-6 °C.